How to Use, Maintain and Get the Most from Your Onyx Avanti Gas Fire
This guide explains:
The Onyx Avanti range has been designed to deliver a contemporary gas fire experience with impressive flame visuals, advanced controls and elegant design.
Available in a variety of sizes and installation configurations, the Avanti range is suited to modern living spaces seeking both performance and style.
Key features include:
To ignite your fire:
1. Cradle the remote control in your hand.
2. Wait for the green Grip Lock safety light to illuminate.
3. Press and hold the power button.
4. Wait for "Pilot" to flash on the display.
5. Release the button.
Your Avanti gas fire will ignite and the flame icon will appear on the handset display.
The Avanti uses Grip Lock safety technology.
The handset detects whether it is being held during operation, helping prevent accidental activation and ensuring safe control of the appliance.
Use the + and − buttons on the remote control.
This allows you to increase or decrease flame height and heat output to suit the comfort level of your room.
Simply press the power button on the remote control.
The appliance will safely shut down.
Yes.
The Avanti range includes thermostatic temperature control, helping maintain your preferred room temperature automatically.
This provides both comfort and efficient operation.
Yes.
The Avanti gas fire offers advanced programming functionality, including up to 7-day scheduling.
This allows you to create heating schedules that suit your weekly routine.
For full programming instructions, refer to your user manual.
The remote control displays battery status indicators.
Remote Control Batteries
When C appears alongside the indicator, the display is showing the handset battery level.
Fire Batteries
When FC appears, the display is showing the battery level inside the fire.
If either indicator shows a low battery level, replacement is recommended.
1. Slide off the rear battery cover.
2. Remove the old batteries.
3. Insert two new high-quality alkaline batteries.
4. Replace the cover.
For best performance, premium alkaline batteries are recommended.
To access the battery compartment:
1. Remove the magnetic side panels.
2. Lift the lower front access panel.
3. Locate the battery pack.
4. Remove the battery cover.
5. Replace the three batteries using high-quality alkaline replacements.
This process is simple and designed to minimise maintenance time.
Onyx recommends replacing the batteries within the fire annually as part of your routine service appointment.
Only clean the appliance when fully cooled.
To clean the glass:
1. Use a clean damp cloth.
2. Wipe away surface marks.
3. Buff dry using a lint-free cloth.
Avoid abrasive cleaning products or rough cloths.
Your Avanti gas fire should be professionally serviced once every year.
Annual servicing helps maintain:
• Performance
• Safety
• Reliability
• Efficiency
• Warranty compliance
Yes.
Registering your fire through Onyx helps activate extended warranty benefits and keeps you connected with manufacturer support and ownership resources.
The Avanti range has been designed to create a striking focal point, delivering captivating flame effects that enhance contemporary living spaces.
Operate your fire from your sofa using the fully thermostatic remote handset. Control ignition, flame height and advanced heating functions with ease.
With up to seven-day scheduling available, the Avanti can fit seamlessly around your lifestyle.
Frameless styling and panoramic flame views help make the Avanti an impressive centrepiece in modern interiors.
Accessible battery compartments, magnetic access panels and thoughtful engineering help simplify servicing and ownership.
Let's take a look at the fantastic new Avanti range of insect gas fires from the premium Onyx brand. This video is designed to provide you with a short how to for using and maintaining your new Avanti fire. No doubt you'll have bought from an Onyx approved expert retailer who has provided a safe and stunning installation. Avanti gas fires come with full remote operation and thermostatic control for absolute convenience. To get your Avanti fire started first, cradle the remote in your hand as shown. You'll see the green grip block safety light activate indicating that both your fire and handset are ready to use. Now press and hold the power button and wait for the word pilot to flash on screen. Release the power button and your Avanti will ignite. The flame icon will simultaneously appear on screen. If the power button is held down too long, the command to ignite will be canceled. To increase or decrease your flames height, use the plus and minus buttons. To turn off the appliance, simply press the power button. As mentioned, Avanti Gas Fires also feature thermostatic control, along with up to seven day time of programming. For instructions on using these and other advanced control features, please refer to your user manual. Before carrying out any maintenance, you should first make sure the fire is switched off and has fully cooled down. Continue only when you are sure it is safe to do so. Now your remote has a helpful battery indicator beside which two pairs of letters will appear. A alternatively, when the letters are C appear beside this indicator, your remote is showing you its own battery level. When the letters FC appear, the level shown is for the batteries in your fire. If either of these levels are empty, you will need to change the batteries in your remote or fire as indicated. This is quick and straightforward for your remote. Simply slide off the back cover and replace the batteries inside with two high quality alkaline batteries such as Duracell Pro cells. Replace the cover plate and you're ready to go. To change the batteries in your TI Fire, start by removing the magnetically attached side panels from the front of the fire. Next, lift up the base panel in front of the firebox and you'll see the battery pack nestled inside. You can now unscrew the cover plate and replace the three batteries. Again, it is essential that you use high quality alkaline batteries. We recommend that the batteries in your fire are changed at least once a year as part of your annual service. Cleaning the exterior glass of your Ivanti fire is also simple. Just wipe it down with a clean damp cloth and buff dry with a lint-free duster. Do remember that your Avanti should be serviced once a year. Your Onyx retailer can arrange this for you, or alternatively Onyx. Offer a premium manufacturer's service. Don't forget to register your fire for its extended warranty at onyxfires.com. This puts you in with the chance to win back the cost of your fire for a second chance to win. You can also take a photo of your Avanti installation and upload it to the Onyx Owner Expo. We love to see our products transforming real homes. We hope this video has been helpful in giving you all the information you need to start using your superb new Avanti insect gas fire and that you'll be enjoying the comfort and ambience it brings to your home for years to come.
